View PART_4257281.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
FEATURES
* * * * * * * * Subminiature package size and light weight Rectangular case with axial or radial leads 2 to 35 VDC 0.1 F to 470 F Operating temperature range: - 55 C to + 125 C High stability and reliability Tested in accordance with MIL-PRF-49137 Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55 C to + 125 C Capacitance: Measured at 120 Hz and 25 C with a maximum of 2.2 VDC bias and 1.0 Vrms signal. Capacitance Tolerance: Standard tolerance is 20 % for ratings 0.1 F and above, and + 40, - 20 % for ratings below 0.1 F. Special tolerances are also available. Dissipation Factor: When measured simultaneously with capacitance, DF shall not exceed the value shown in the ratings tables. DC Leakage Current (DCL Max.): When measured with DC voltage applied through a 1000 resistor for 5 min, DC leakage (A) shall not exceed: At 25 C: Leakage current shall not exceed the values listed in the Standard Ratings Tables At 85 C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables At 125 C and 66 % of Rated Voltage: Leakage current shall not exceed 15 times the values listed in the Standard Ratings Tables Operating Voltage: Full working voltage up to 85 C. From 85 C to 125 C working voltage derates linearly to 66 % of the 85 C working voltage
APPLICATIONS
* Hearing aids * Portable communications * Space/avionics * Laptop computers
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type N32 per MIL-STD-1276) are standard on all case sizes Leads are weldable and/or solderable Special leads are available on request (e.g. bare nickel, gold plated nickel or ribbon leads) Lead length is 1 1/2" [38.1 mm] minimum on nonpolar PARTs On polar PARTs the negative lead is 1 1/4" [31.8 mm] minimum and the positive lead is 1 1/2" [38.1 mm] minimum
ORDERING INFORMATION
STC MODEL 1.0 CAPACITANCE IN F 35 DC VOLTAGE RATING AT + 85 C C2 CASE CODE C = Polar N = Non-polar A (1) LEAD CONFIGURATION A = Axial R = Radial M CAPACITANCE TOLERANCE E = + 40, - 20 % M = 20 % K = 10 % J= 5%
Example of PART Number Code: STC1.0-35C2AM Note: (1) To complete PART number in rating tables, add A or R. Change suffix if special capacitance tolerance is required.
Document Number: 43006 Revision: 10-Dec-07
For technical questions, contact: tantalum@vishay.com
www.vishay.com 91
STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
DIMENSIONS in inches [millimeters]
POLAR STYLE
AXIAL
T RED EPOXY W d
RADIAL
T POLARITY DOT W
(+)
3RD DOT 2ND DOT 1ST DOT TOLERANCE DOT d d L 3RD DOT 2ND DOT 1ST DOT TOLERANCE DOT L
(-)
E
(+)
THE 3RD DOT IS ON THE END OF THE CX SIZE
CASE CODE CX C0 C1 C2 C3 C4 C5 C6 NON POLAR STYLE
L MAX. 0.075 [1.91] 0.100 [2.54] 0.125 [3.18] 0.165 [4.19] 0.225 [5.72] 0.290 [7.37] 0.310 [7.87] 0.475 [12.07]
W MAX. 0.050 [1.27] 0.050 [1.27] 0.070 [1.78] 0.120 [3.05] 0.185 [4.70] 0.220 [5.59] 0.230 [5.84] 0.375 [9.53]
T MAX. 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] 0.070 [1.78] 0.075 [1.91] 0.110 [2.79] 0.130 [3.30] 0.150 [3.81]
E 0.030 [0.76] 0.030 [0.76] 0.050 [1.27] 0.100 [2.54] 0.150 [3.81] 0.180 [4.57] 0.200 [[5.08] 0.300 [7.62]
E TOL. 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.020 [0.51] 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64]
d 0.007 [0.18] 0.007 [0.18] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.016 [0.41] 0.016 [0.41] 0.016 [0.41]
AXIAL T
W d TOLERANCE DOT 2ND DOT
RADIAL T
W TOLERANCE DOT 2ND DOT
LA
1ST DOT 3RD DOT d E 1ST DOT 3RD DOT
LR
CASE CODE N1 N2 N3 N4
LA MAX. 0.220 [5.59] 0.280 [7.11] 0.370 [9.40] 0.390 [9.91]
LR MAX. 0.180 [4.57] 0.240 [6.10] 0.315 [8.00] 0.335 [8.51]
W MAX. 0.125 [3.18] 0.140 [3.56] 0.180 [4.57] 0.230 [5.84]
T MAX. 0.125 [3.18] 0.180 [4.57] 0.220 [5.59] 0.230 [5.84]
E MAX. 0.100 [2.54] 0.100 [2.54] 0.150 [3.81] 0.180 [4.57]
E TOL. 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64]
d 0.010 [0.25] 0.010 [0.25] 0.016 [0.41] 0.016 [0.41]
www.vishay.com 92
For technical questions, contact: tantalum@vishay.com
Document Number: 43006 Revision: 10-Dec-07
STC
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE (F) 0.0022 0.0033 0.0047 0.0068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 2.2 6.8 100 1.5 22 68 100 1.0 4.7 10 15 47 68 220 470 0.68 3.3 33 47 150 330 0.47 1.5 2.2 6.8 22 33 100 220 1.0 4.7 15 22 68 150
(1)
Vishay Sprague
MAX DF (%) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 15 15 10 8 6 6 10 15 10 6 6 6 6 6 8 6 6 6 6 6 6 10
MAX. DCL AT + 25 C (A) 2 WVDC AT + 85 C 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.0 3 WVDC AT + 85 C 0.5 1.0 2.0 3.0 4 WVDC AT + 85 C 0.5 0.5 1.0 1.0 2.0 3.0 9.0 10.0 6 WVDC AT + 85 C 0.5 0.5 2.0 3.0 9.0 10.0 10 WVDC AT + 85 C 0.5 0.5 0.5 1.0 2.0 3.0 9.0 0.5 15 WVDC AT + 85 C 0.5 1.0 2.0 3.0 6.0 10.0
CASE CODE CX CX CX CX CX CX CX CX CX CX CX CX CX C0 C1 C3 C0 C2 C3 C4 C0 C1 C2 C2 C3 C4 C5 C6 C0 C1 C3 C4 C5 C6 C0 C1 C1 C2 C3 C4 C5 C6 C1 C2 C3 C4 C5 C6
PART NUMBER STC.0022-2CX (1)E STC.0033-2CX (1)E STC.0047-2CX (1)E STC.0068-2CX (1)E STC.10-2CX (1)M STC.15-2CX (1)M STC.22-2CX (1)M STC.33-2CX (1)M STC.47-2CX (1)M STC.68-2CX (1)M STC1.0-2CX (1)M STC1.5-2CX (1)M STC2.2-2CX (1)M STC2.2-2C0 (1)M STC6.8-2C1 (1)M STC100-2C3 (1)M STC1.5-3C0 (1)M STC22-3C2 (1)M STC68-3C3 (1)M STC100-3C4 (1)M STC1.0-4C0 (1)M STC4.7-4C1 (1)M STC10-4C2 (1)M STC15-4C2 (1)M STC47-4C3 (1)M STC68-4C4 (1)M STC220-4C5 (1)M STC470-4C6 (1)M STC.68-6C0 (1)M STC3.3-6C1 (1)M STC33-6C3 (1)M STC47-6C4 (1)M STC150-6C5 (1)M STC330-6C6 (1)M STC.47-10C0 (1)M STC1.5-10C1 (1)M STC2.2-10C1 (1)M STC6.8-10C2 (1)M STC22-10C3 (1)M STC33-10C4 (1)M STC100-10C5 (1)M STC220-10C6 (1)M STC1.0-15C1 (1)M STC4.7-15C2 (1)M STC15-15C3 (1)M STC22-15C4 (1)M STC68-15C5 (1)M STC150-15C6 (1)M
Note: Add A for axial, R for radial For technical questions, contact: tantalum@vishay.com www.vishay.com 93
Document Number: 43006 Revision: 10-Dec-07
STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE (F) 0.68 3.3 6.8 10 15 47 100 0.47 2.2 3.3 4.7 10 15 22 33 68 0.33 0.68 1.0 1.5 Note: (1) Add A for axial, R for radial MAX DF (%) 6 6 6 6 6 6 10 6 6 6 6 6 6 6 6 6 6 6 6 6 MAX. DCL AT+ 25 C (A) 20 WVDC AT + 85 C 0.5 1.0 2.0 2.0 3.0 6.0 10.0 25 WVDC AT + 85 C 0.5 1.0 2.0 2.0 3.0 6.0 6.0 6.0 10.0 35 WVDC AT + 85 C 0.5 1.0 1.0 1.0 CASE CODE C1 C2 C3 C3 C4 C5 C6 C1 C2 C3 C3 C4 C5 C5 C5 C6 C1 C2 C2 C2 PART NUMBER STC.68-20C1 (1)M STC3.3-20C2 (1)M STC6.8-20C3 (1)M STC10-20C3 (1)M STC15-20C4 (1)M STC47-20C5 (1)M STC100-20C6 (1)M STC.47-25C1 (1)M STC2.2-25C2 (1)M STC3.3-25C3 (1)M STC4.7-25C3 (1)M STC10-25C4 (1)M STC15-25C5 (1)M STC22-25C6 (1)M STC33-25C5 (1)M STC68-25C6 (1)M STC.33-35C1 (1)M STC.68-35C2 (1)M STC1.0-35C2 (1)M STC1.5-35C2 (1)M
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE (F) 10 33 47 100 6.8 22 33 68 4.7 15 22 47 3.3 10 15 33 Note: (1) Add A for axial, R for radial MAX DF (%) 10 10 8 10 8 8 8 8 6 6 6 6 6 6 6 6 MAX. DCL AT + 25 C (A) 2 WVDC AT + 85 C 1.0 3 WVDC AT + 85 C 2.0 3.0 6.0 4 WVDC AT + 85 C 1.0 2.0 3.0 6.0 6 WVDC AT + 85 C 1.0 2.0 3.0 6.0 10 WVDC AT + 85 C 1.0 2.0 3.0 6.0 CASE CODE N1 N2 N3 N4 N1 N2 N3 N4 N1 N2 N3 N4 N1 N2 N3 N4 PART NUMBER STC10-2N1 (1)M STC33-3N2 (1)M STC47-3N3 (1)M STC100-3N4 (1)M STC6.8-4N1 (1)M STC22-4N2 (1)M STC33-4N3 (1)M STC68-4N4 (1)M STC4.7-6N1 (1)M STC15-6N2 (1)M STC22-6N3 (1)M STC47-6N4 (1)M STC3.3-10N1 (1)M STC10-10N2 (1)M STC15-10N3 (1)M STC33-10N4 (1)M
www.vishay.com 94
For technical questions, contact: tantalum@vishay.com
Document Number: 43006 Revision: 10-Dec-07
STC
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE (F) 2.2 6.8 10 22 1.5 4.7 6.8 15 1.0 2.2 3.3 4.7 10 0.68 Note: (1) Add A for axial, R for radial MAX. DF (%) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 MAX. DCL AT + 25 C (A) 15 WVDC AT + 85 C 1.0 2.0 3.0 6.0 20 WVDC AT + 85 C 1.0 2.0 3.0 6.0 25 WVDC AT + 85 C 1.0 2.0 2.0 3.0 6.0 35 WVDC AT + 85 C 1.0 CASE CODE N1 N2 N3 N4 N1 N2 N3 N4 N1 N2 N2 N3 N4 N1 PART NUMBER STC2.2-15N1 (1)M STC6.8-15N2 (1)M STC10-15N3 (1)M STC22-15N4 (1)M STC1.5-20N1 (1)M STC4.7-20N2 (1)M STC6.8-20N3 (1)M STC15-20N4 (1)M STC1.0-25N1 (1)M STC2.2-25N2 (1)M STC3.3-25N2 (1)M STC4.7-25N3 (1)M STC10-25N4 (1)M STC.68-35N1 (1)M
Vishay Sprague
MARKING
All other case sizes are have color dot marking: STC Capacitors case sizes C3 - C6 and N2 - N4 are print marked: - Capacitance is in picofarads - 1st and 2nd digits are significant figures - 3rd digit indicates the number of zeros. Capacitance In picofarads, indicated by 3 dots. 1st and 2nd dot give the significant digits. 3rd dot indicates the number of zeros. Color dot location is shown on the dimensional sketches. Black dot is omitted on black sleeve. Color Black Brown Red Orange Yellow Green Capacitance Tolerance Is indicated by a dot on the side of the case. Black dot is omitted. Color Gold Silver None None Tolerance 5% 10 % 20 % + 40 %/- 20 % e.g. Yellow-Violet-Green = 4 700 000 pf The positive lead is indicated by a color dot of red epoxy on the unit. = 4.7 F Blue Violet Grey White Digit 0 1 2 3 4 5 6 7 8 9
Document Number: 43006 Revision: 10-Dec-07
For technical questions, contact: tantalum@vishay.com
www.vishay.com 95
STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar
PERFORMANCE AND RELIABILITY
The capacitors are tested in accordance with MIL-PRF49137, with specific requirements as follows: Temperature Stability: When tested per MIL-PRF-49137/ 6, capacitance shall be within 15 % at - 55 C and 85 C, and 10 % at 25 C after exposure to temperature extremes. DF shall be within 200 % of initial limit at - 55 C, 150 % of initial limit at 85 C, and meet the initial at 25 C. DCL shall be within 10 x initial limit at 85 C, and meet the initial limit at 25 C. Moisture Resistance: (per Method 106 of MIL-STD-202) After 10 cycles of 24 h at 25 C to 65 C and 80 - 98 % RH; capacitance shall be within 15 % of initial value, DF within 1.5 x initial limit and leakage within 3 x initial limit. Life: (per Method 108 of MIL-STD-202) after 1000 h at 85 C and rated voltage; capacitance shall be within 10 % of initial limit, DF within initial limits, and leakage within 200 % of initial limit. Surge Voltage: (per MIL-PRF-49317) After 1000 cycles at 85 C and 1.3 x WVDC; capacitance shall be within 10 % of initial limit, DF and leakage within initial limits. Resistance to Soldering Heat: (per Method 210 of MIL-STD-202, Condition B) After immersion in 260 C molten solder to within a 1/4" of the body of the unit, there shall be no evidence of mechanical or electrical degradation. Solderability: (per Method 208 of MIL-STD-202) After dipping leads in 235 C molten solder to within 0.125" of the body of the unit, the solder shall cover 95 % of the lead surface. Terminal Strength: (per Method 211 of MIL-STD-202) After the following test there shall be no loosening of the terminals or permanent damage to the terminals. Test Condition A: (Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2 pounds and 0.007" leads 1/2 pound. Test Condition C: (Bend Test) All leads shall withstand 3 - 90 bends with a 1/2 pound applied force.
IMPEDANCE VS. FREQUENCY
10K 5K 2K 1K 500 200
0. 04
(MFD-WVDC)
100 50 20 10 5.0 2.0 1.0 0.5 0.2 0.1 100 500 1 2 5
4.7
7 F -2 0V 0. 0. 04 04 7 7F F -2 -3 0 V 5V 0.0 0.0 47 47 F F -50 -3 V 5V 4. 4.7 7 F F -10 -2 V 0V
F -2
IMPEDANCE
0V
10 20 50 100
500
1
2
5 10
Hz
kHz
FREQUENCY
kHz
MHz
LEAKAGE CURRENT - TEMPERATURE
1.0 (MFD-WVDC)
CAPACITANCE VS. TEMPERATURE
+ 10 (MFD-WVDC)
I C FI I AT
CHANGE IN CAPACITANCE %
ON
D.C. LEAKAGE CURRENT (A)
+5
SP
EC
1 F-20 V 100 F-10 V 0.1
0
10
-5
0
F
-1
0V
TY
F 0 10 AL PIC
0 -1
V
1
TI CA ON
H
-2
0V
E SP
CI
FI
- 10 - 40
0.01 + 25 + 85 + 100 - 40 - 10 0 + 20 + 85
- 10
TEMPERATURE C
TEMPERATURE C
www.vishay.com 96
For technical questions, contact: tantalum@vishay.com
Document Number: 43006 Revision: 10-Dec-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of PART

	To Download PART Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .